TV Mounting in the Bedroom: Height & Placement

The bedroom is one of the most common rooms we mount a TV in across Lexington — and one of the easiest to get wrong. In a living room, the math is simple: the TV goes on the main wall, roughly at eye level from the couch. In a bedroom, you're lying down, the wall is competing with a headboard and nightstands, and you're often watching in the dark. Put the TV an inch off and sitting up in bed to watch gets old fast.

The good news is a bedroom TV still follows the same rules we use everywhere else — right height, solid wall, clean wires. It's just those rules apply from a different chair (or bed). Here's what we walk Lexington homeowners through when the TV is going over the dresser or on the wall opposite the bed.

Mount It at Eye Level From the Bed

The most common mistake is mounting a bedroom TV too high. The reference point is your eyes when you're in your normal viewing position — usually sitting up against the headboard or with pillows behind you. The center of the screen should sit right around that line, which for most bedrooms lands the screen center in the 45–50 inch range off the floor, a bit higher than a living room mount.

Notice the difference from the usual "center at 42 inches" living-room guidance: because a bed is lower and often farther from the wall than a couch, a bedroom screen center often needs to come up a few inches. And if you plan to watch lying flat, a tilting mount is worth the small step up in price — it angles the screen down toward your line of sight instead of forcing you to crane your neck. For a central Lexington home with mixed viewing (sitting and lying down), multiple people in the bed don't always line up, so a tilt gives you room to adjust on the fly.

Pick the Right Wall and Consider the Angle

The wall opposite the bed at the foot of the room is usually the favorite — it's the natural focal point and it lets you lay out the room around it. That said, reflect on the windows: a screen mounted on a wall facing a morning east window washes out in the early light, and a west-facing window makes evening watching a glare battle. If the only good spot faces a window, plan around it with blinds or position the TV to minimize the reflected light.

In bedrooms where the bed sits at an angle or the TV needs to serve a reading nook too, a full-motion mount helps. Its arm pulls the screen away from the wall and angles it toward wherever you're sitting or lying. On 32–55-inch bedroom TVs that's a common upgrade. Just remember a full-motion mount needs solid anchoring, because the extended arm puts leverage on the wall.

Headboard Walls and Wall Construction

Mounting over the bed — directly above the headboard on an accent wall — can look great, but it demands height be right: too low and you're hitting your head getting in and out of bed, too high and the screen spends the whole show overhead. We only recommend it when the room is wide enough to keep a comfortable viewing distance, and the mount goes high enough to clear a person sitting up.

Bedrooms in older Lexington homes often sit on plaster and lath or brick exterior walls, while newer bedroom additions and townhomes may have metal studs or block walls. None of these change the outcome — they change the hardware and the technique. A pro checks the wall type first, so the mount bites into solid material and never loosens under the weight of a TV that hangs over your bed at night.

Managing Bedroom Cables, Cleanly

Bedrooms get cable clutter worse than any other room, because the TV is usually across from the media table — and the wires have to cross the room. The cleanest fix is running the cables up or down the wall behind the TV and hiding them. On a finished wall, that usually means an in-wall outlet add-on ($150) so the power is behind the screen, plus a low-voltage path for the HDMI back to the dresser or nightstand.

If the media devices are going to live far from the wall — say a cabinet on the side of the room — a short in-wall run or a surface raceway keeps the path tidy. For homes where running cable through the wall isn't practical, our powerline add-on ($99) carries the network signal over the home's existing electrical wiring so the TV streams over Wi-Fi or Ethernet without a long visible cable. Our full guide to hiding TV wires in the wall covers the options in detail.

Size It to the Room

Bedrooms get oversized TVs more than any room in the house. From the bed, a 55-inch screen on the opposite wall can feel enormous, while a 43-inch often fills the view comfortably from a typical bedroom distance of eight to ten feet. Use our TV size guide to match the screen to your actual viewing distance — a bigger screen isn't automatically better when it dominates the room and the wall.

What a Bedroom TV Mount Costs

Bedroom mounting uses the same prices as everywhere else: TV mounting starts from 32\" $79, 43\" $99, 50\" $109, 55\" $119, 65\" $139, 75\" $179, and 85\" $219. Tilting mounts add $45 at any size; full-motion mounts add $125 on 32–55-inch TVs (special order). An in-wall outlet add-on is $150, powerline $99, a soundbar $40, smart setup $35, and old TV removal $30.

Because bedrooms rarely need a soundbar, the job is often just the mount, the height, and the wires — and a well-mounted bedroom TV frequently comes in on the lower end of the price scale. The value is in getting the height and the clean install right the first time.

Frequently Asked Questions

How high should a TV be above the floor in a bedroom?

Center the screen at eye level from your sitting-up viewing position — usually around 45 to 50 inches off the floor, slightly higher than a living room. If you spend time lying flat, add a tilting mount so the screen can angle down toward your eyes.

Is it safe to mount a TV over the bed?

Yes, when it's done right. The mount has to be anchored into solid material (studs, blocking, or masonry anchors depending on the wall), the height has to clear a person sitting up, and you should avoid positioning it directly over a pillow you'll rest under. A properly mounted TV is secure.

Is a tilt or full-motion mount better for a bedroom?

A tilting mount covers most bedrooms because it fixes the lie-down viewing angle affordably. A full-motion mount helps when the bed or reading nook is at an angle and you need to steer the screen toward different spots in the room.

Can the cables be hidden in a bedroom without cutting drywall?

Often, yes. A clean in-wall outlet with a low-voltage plate hides everything behind the screen, and powerline networking can replace a long data cable when a wall path isn't practical. Where an in-wall route really can't be done, a surface raceway painted to match keeps it tidy.

Do I need a soundbar in the bedroom?

Usually not. Bedroom TVs commonly use the built-in speakers or a soundbar ($40) added to the install. If you do add one, it mounts below the TV with its own clean wiring.

Get the Bedroom TV Right the First Time

A bedroom TV that's mounted at the right height, on the right wall, with the wires hidden is a room that actually gets used. Here's how to get started:

1. Measure your viewing position — sit where you'll watch and note the eye-level height, plus the distance to the wall
2. Pick the wall and mount type — decide on tilt vs. full-motion before we arrive so the right mount is on hand
3. Call us — we'll confirm the wall construction, mount at the right height, and hide every cable behind the screen

From primary bedrooms in older Lexington neighborhoods to new builds across Fayette County and the surrounding towns, Lexington TV Guys mounts bedroom TVs the comfortable way — at the right height, on a solid wall, with no wires in sight. Call (859) 414-6646 or use our online pricing tool to get started.